Burrell 7NHP 4½-inch scale Agricultural engine
The Burrell single cylinder engine is based on designs in common use during the early 1900's. It is easy to build and run. It has good facilities available for winching with a relatively large winch drum incorporated into the final drive. Although it has a single drive to the rear axle, it is still capable of pulling loads of up to 7,000 kilos over level ground.
| General Dimensions | |
|---|---|
| Length | 69 3/16" |
| Height | 42 3/16" |
| Track front | 22" |
| Track rear | 24 7/8" |
| Wheel base | 40 3/16" |
| Rear wheel Ø | 24" OD |
| Front wheel Ø | 14 /12" OD |
| Flywheel Ø | 17" OD |
| Final drive gear Ø | 15.428" |
| Total weight | 10 CWT approx. |
| Working pressure | 100 PSI |
| Cylinder bore Ø | 2 3/4" |
| Stroke | 3 3/4" |
Home |
About LSM |
Models |
Supplies |
Gallery |
Events |
Contact Us
All site content is ©2010 Live Steam Models Limited. All rights reserved.